RASEEL CHEMICALS
Product Line
Click any product to open its full technical bulletin with large image and complete text.
- Prevents scale formation and tube failures.
- Reduces deposits and cleaning.
- Scale inhibition, oxygen scavenger and passivation.
- Specifically designed for low alkalinity make-up.
- Neutralizes acid-forming gases like CO2.
- Prevents corrosion, scale and fouling.
- Inhibits mineral scales and disperses silt.
- Effective against a broad spectrum of microorganisms.
- Prevents deposition of suspended solids.
- Protection for mild steel, copper and yellow metals.
- Protects metals, prevents overheating.
- Prevents corrosion and “red water”.
- Membrane cleaner for iron fouling and calcium carbonate.
- Antiscalant for a broad spectrum of waters.
- Cleaner for organic and colloidal fouling.
- Easily soluble, dense rapidly settling flocs.
- High quality anionic flocculant.
RASEEL-XXXX
PRODUCT BENEFITS
- Prevents scale formation and resulting tube failures
- Reduces deposits, resulting in more efficient heat transfer, energy savings and fewer acid cleanings
- Supports internal metal passivation in feedwater and boiler system
- Multifunctional properties, acts also as fast oxygen scavenger
- Contains only FDA approved ingredients.
PRINCIPAL USES
Raseel-20210 is designed to assure a high level of cleanliness in the boiler system, especially on the heat transfer surfaces, together with a complete corrosion inhibiting action. The product supports internal metal passivation. Raseel-20210 can be applied in low pressure boiler systems without deaerator and on softened feedwater make-up with a total feedwater hardness of up to 15 ppm. By providing clean heat transfer surfaces, Raseel-20210 saves energy and reduces cleaning and maintenance costs. Raseel-20210 is not volatile and is in compliance with FDA and USDA regulations. Suggested maximum use pressure for Raseel 20210 is 40 bar.
PRODUCT BENEFITS
- Prevents scale formation and resulting tube failure
- Oxygen scavenger and metal passivator for boiler systems
- Reduces deposits, resulting in more efficient heat transfer, energy savings and fewer acid cleanings
- Protects steam and condensate lines from corrosion
- Provides high steam purity also at higher cycles of concentration
- Easy to use, simple to control.
PRINCIPAL USES
RASEEL 20211 is a multifunctional product designed for maximum scale inhibition, corrosion protection and internal metal passivation. Steam and condensate lines are protected by specific inhibitors. RASEEL 20211 is used for the treatment of softened boiler feedwater up to 2 ppm total hardness and a maximum operating pressure of 60 bar. By maintaining clean heat transfer surfaces RASEEL 20211 saves energy and maintenance costs. The product ingredient RASEEL-ELOX provides reliable oxygen scavenging and system passivation if deaeration works properly. Foam formation in the boiler and resulting carry-over are prevented effectively.
PRODUCT BENEFITS
- Specifically designed for boilers using low alkalinity make-up water (demin, RO-permeate)
- Essentially non-corrosive to boiler internals
- Actively prevents deposits over internal boiler surfaces, assuring high efficiency
- Increases boiler water alkalinity
- Contains only FDA approved ingredients - suitable for food industry.
PRINCIPAL USES
RASEEL 20230 is a liquid boiler feedwater treatment designed for a maximum deposit and scale control, maintaining boilers at optimum operating conditions. RASEEL 20230 is specifically formulated for boilers running with demineralized, softened water or RO-permeate at higher temperatures and pressures up to 40 bar. The product is not volatile and can be used in food industry including dairies (FDA compliance).
For a complete boiler water treatment RASEEL 20230 should be used together with an oxygen scavenger program.
PRODUCT BENEFITS
- Effective neutralization of acid-forming gases like CO2
- Provides corrosion protection in initial, middle and extended areas of condensate systems
- Effectively reduces condensate system maintenance costs
- Minimizes boiler tube failures caused by corrosion product in the returned condensate.
PRINCIPAL USES
RASEEL 21312 is a neutralizing corrosion inhibitor designed for use in steam and complex condensate systems. The product may be used at steam pressures up to 160 bar and temperatures up to 454°C.
REMARK: RASEEL 21312 is in compliance with FDA regulations pertaining to boiler water additives. Maximum dosage in plants subject to FDA regulation is not to exceed 45 ppm in the steam. RASEEL 21312 must not be used where the steam produced will contact milk or milk products.
PRODUCT BENEFITS
- Prevents corrosion, scale and fouling deposition in open recirculating cooling water systems
- Is effective in protecting mild steel and copper alloy surfaces
- Controls scale formation under alkaline pH conditions while reducing need for acid
- Excellent dispersant effect on phosphates, zinc, iron
- Resistant to chlorine.
PRINCIPAL USES
RASEEL 31220 is an antiscale and corrosion inhibitor for recirculating cooling water systems, belonging to the RASEEL ALKALINE-ZINC program line. RASEEL 31220 represents a further improvement over traditional programs as it takes full advantage from the new RASEEL PLUS Polymers. RASEEL 31220 is a powerful antiscale resistant to time, temperature and pH fluctuation, preventing mineral scale in recirculating cooling water systems. RASEEL 31220 forms a particularly tightly-bound protective film on metal surfaces, preventing pitting and general corrosion attacks.
PRODUCT BENEFITS
- Inhibits formation of mineral scales
- Disperses silt and other suspended solids
- Helps maximize heat transfer
- Can reduce maintenance costs and prolong equipment life.
PRINCIPAL USES
Raseel 31200 is a multifunctional product designed to help maintain clean heat transfer surfaces in industrial cooling water systems. This unique blend is formulated to inhibit the formation of mineral scales and provide dispersancy for mud, silt and other suspended solids.
PRODUCT BENEFITS
- Effective against a broad spectrum of microorganisms over extended periods
- Helps to minimize slime problems which can cause costly reductions in heat transfer
- Minimum discharge problems; active molecules are environmentally degradable
- Easy application; active at low dosages.
PRINCIPAL USES
RASEEL 31240 is a broad spectrum, nonoxidizing microbicide for industrial open recirculating systems, air washers, and brewery pasteurizers and closed systems. It is designed to provide excellent control of microbiological growth and associated deposits. RASEEL 31240 is particularly well suited for use in systems with high levels of process contamination, as in the fertilizer, refinery, and chemical industries.
PRODUCT BENEFITS
- Inhibits deposits of silt, iron and slime, maintaining heat transfer efficiency
- Improves effectiveness of chlorination and biocides
- Contains no heavy metals
- It is effective in dispersing/emulsifying hydrocarbon oil,
- Prevents oily deposits in pipes, heat transfer surfaces and cooling towers.
PRINCIPAL USES
RASEEL-31252 is a liquid blend of dispersants that will help prevent deposition of suspended solids in recirculating cooling water systems. It is highly effective in dispersing silt, airborne debris, iron and organic fouling.
PRODUCT BENEFITS
- Suitable for use with polyamide thin film composite and cellulose acetate membranes
- Liquid product for ease of use
- High level of active substance
- Buffered to ensure consistent pH control.
PRINCIPAL USES
RASEEL 41210 is a membrane cleaner specifically developed to remove iron fouling from reverse osmosis (RO) and nano-filtration (NF) membranes. It can also be used to remove light calcium carbonate deposition.
PRODUCT BENEFITS
- Highly effective antiscalant across a broad spectrum of waters
- Minimizes scaling and reduces the frequency of membrane cleaning
- Will reduce, and usually replace the need for acid addition
- Low dose rate gives a cost effective application
- Compatible with all membrane types
- Effective iron sequestrant
- More stable and more effective than sodium hexametaphosphate (SHMP)
- Enables systems to work at enhanced rates of recovery
- Extensive portfolio of toxicological and environmental data available.
PRINCIPAL USES
Raseel-41200 is one of the principal antiscalants used by the membrane industry. For almost 20 years Raseel-41200 has found application as an antiscalant and antifoulant in membrane systems using a wide selection of brackish, high salinity, process and effluent feed-waters.
PRODUCT BENEFITS
- Suitable for use with polyamide thin film composite and cellulose acetate membranes
- Effective removal of organic matter
- High level of active substance
- Liquid product, easy to handle and simple to apply.
PRINCIPAL USES
RASEEL 41211 has been developed for the cleaning of reverse osmosis (RO), nano-filtration (NF) and ultra-filtration (UF) membranes. Its formulation is based on an anionic surfactant and is most effective in removing colloidal and other organic matter.
During normal operation, reverse osmosis and other membranes can become fouled, which greatly reduces the efficiency of the system. Deposits build up on the membrane until they cause a reduction in normalized permeate flow, increases in differential pressure and losses in salt rejection. The effects of fouling can lead to poor water quality, loss in production, unscheduled downtime and premature membrane replacement.
A regular maintenance and cleaning program can provide a significant return on investment by extending system run time, preventing membrane degradation, maintaining lower feed pressures and extending the membrane’s life.
When RASEEL 41211 is used in conjunction with microbial control agents, it is effective against biofilm.
RASEEL 41211 should always be used as recommended by the membrane manufacturer with respect to pH, temperature, flow rate and differential pressure.
PRODUCT BENEFITS
- Contains corrosion inhibitors for ferrous and yellow metals
- Helps extend equipment life and reduce maintenance costs
- Contains no heavy metals
- Compatible with antifreeze.
PRINCIPAL USES
RASEEL 51200 provides maximum protection for mild steel, copper and yellow metals in closed cooling systems fed with distilled, demineralized or softened water.
RASEEL 51200 is widely applied in closed cooling systems of steel mills, power stations, refineries and many other industrial plants.
PRODUCT BENEFITS
- Protects all common metals from corrosive attack
- Protects against cavitation-erosion
- Helps to keep engines free from sludge and scale deposits
- Compatible with ethylene glycol anti-freezes
- Helps to prevent overheating
- Simple to control, easy to apply, safe to handle
- Approved by most diesel engine manufacturers.
PRINCIPAL USES
Raseel 51210 has been designed for use in all common types of closed engine cooling systems. The product protects ferrous metals, copper and copper alloys and all other metals including aluminum components. It should not be used however where aluminium is the prevailing alloy. RASEEL 51210 will not affect rubber gaskets or other non-metallic components within the cooling system.
RASEEL 51210 is particularly suitable for the coolant of auxiliary diesel engines containing aluminum components and is fully compatible with water/ethylene glycol solutions. It contains an anti-incustant and helps to keep engine systems clean and free from corrosion and scale formation. It maintains design heat transfer efficiencies and extends the life of the engine.
PRODUCT BENEFITS
- Prevents corrosion and deposit formation in industrial and domestic water supply systems
- Effectively controls corrosion in corrosive, low hardness waters
- Prevents formation of “red water”
- Extends pipe and equipment life
- Potable grade - can be used in domestic and potable water lines
- Easy and safe to handle liquid product.
PRINCIPAL USES
RASEEL 51230 is designed to prevent corrosion, scale and the formation of red water in industrial closed cooling- and hot water systems filled with soft/softened water. It is also applied in once through cooling systems and in domestic and potable water supply lines and firefighting systems to prevent corrosion and scaling problems. RASEEL 51230 has the approval of several European countries for use in potable applications.
PRODUCT BENEFITS
- Easily soluble in water
- Produces dense, rapidly settling flocs
- Is highly active and therefore effective at low dosage rates
- Improve throughput and cake solids
- Contributes little to solids for further processing or disposal.
PRINCIPAL USES
Raseel 71200 can be used in a wide range of applications, like Belt filter, centrifuge, screw press de-watering increased production rate, cake solids and solids capture. Thickening - improved compaction, settling drainage and effluent quality Dissolved air flotation - results in clearer supernatant, increased float solids and plant throughput Secondary clarification - improves final quality by reducing suspended solids and turbidity.
PRODUCT BENEFITS
Raseel 71220 can be used in a wide range of applications. It is produced with the highest quality standard to ensure quick dissolution, absence of gels, minimum dusting compared to other powder polymers.
PRINCIPAL USES
Raseel 71220 is used for water preparation, waste water clarification, sludge conditioning in mining and several different industrial processes.